Group Instrumentation

Leading Technology for Emission Monitoring and Process Control
< Home | Our Products > Gas Analysers > In-situ Continuous Analysers

In-situ Continuous Analysers

The Protea series of continuous emission monitoring instruments are designed for in stack analysis of mulitple gas phase emission components.


The use of the advanced in-situ 'Enveloped Folded Beam' sample cell avoids the need to extract a sample from the stack. Thus, the use of costly high maintenance sample handling systems is eliminated. More importantly the instrument analyses an unmodified, truly representative gas sample.


Sintered stainless steel filter panels fitted to the sides of the in-stack measuring cell allows the permeation of stack gas whilst preventing the ingress of dust and particulates. This also allows the introduction of zero and span gas enabling the system to be fully verified on stack, complying with international regulations.


Infrared instruments operate on the single beam dual wavelength principle where pulses of two specific wavelengths, are sent through the sample cell of the analyser, where they are reflected back to the head of the analyser for processing. The 'measure' pulse is partially absorbed by the gaseous component(s) to be measured whilst the 'reference' pulse is unaffected.


The specific wavelengths used for analysis are obtained by means of interference filters and gas filled cells mounted on a rotating wheel.


  • P2000 Analyser


    In-Situ Infrared, Enveloped Folded Beam, Multigas Analyser.


    Can be operated with either Analyser Control Unit or PC-based Analyser Control for Windows network.

    Download >
In-situ Continuous Analysers image

Product Options

Analysers can be used in any combination with the following control systems

  • In-situ Continuous Analysers

    Analyser Control Unit

    Industrial Control Unit for Protea gas analysers.

  • In-situ Continuous Analysers

    Analyser Control for Windows

    PC based control software for Protea gas analysers.

Proud Australasian Distributors for

Contact Us

Head Office

Ph: (07) 3255 5158

Contact us for further information regarding any of our products using the contact form  here >


We have distributors located around Australia and New Zealand - use the location map to find a distributor in your area.  Find a distributor now >

© Group Instrumentation Pty Ltd | Terms & Conditions | Privacy Policy | Site Map | Distributor Login

Web Design Brisbane :: (zero)seven